Christie use cookies to enhance you user experience while visiting our website, to provide social media features, to serve targeted advertising and to analyse traffic. By clicking 'Accept', closing this message or continuing to use this site, we consider that you agree to our use of cookies in accordance with our Cookie Notice

Crimson HD25

Designed with the technician in-mind, the Crimson Series is built-tough and is easy to ship, handle and install thanks to its compact form factor, quiet operation and 360-degree orientation. Featuring an IP5 sealed, solid-state laser light source, Crimson projectors provide years of reliable, low-cost and virtually maintenance-free operation.

Key features include

  • Christie BoldColor Technology​ - Enhanced colour performance for life-like realism
  • Advanced electronics – Christie TruLife electronics for ultra-fast processing up to 60Hz
  • Blend and warp – Christie Twist built-in for quick and easy setup
  • Seamless integration – ​Compatible with the Christie Mystique automated camera-based alignment software solution
  • ILS lens compatibility – Designed to work with existing Christie M and J Series lenses for added cost savings and versatility

Tick   In stock

  • Specification
  • Downloads
  • Accessories & Lenses
  • Videos & case studies
  • Warranty & Service
Brightness
  • 25,000 (Center)
  • 24,000 (ANSI)
Contrast
  • 2,000:1
Light source
  • BoldColor Laser Phosphor
  • IP5 Rated
  • 20,000 hours to 50%
Display
  • 3 x 0.95” DMD
  • Dust sealed engine
Resolution
  • 1920 x 1080 HD
  • Up to 60Hz
Signal inputs

Standard

  • 2 x 12GSDI
  • 1 x HDMI 2.0
  • 1 x DisplayPort 1.2
  • 1 x Christie Link (QSFP+ Fiber)
  • 1 x HDBaseT

Optional

  • Dual Link DVI Input Card
  • Dual 3G/HD/SD-SDI Input Card
  • Twin Display Port Input Card
  • Twin HDMI Input Card
  • High Bandwidth Multi-Input Card
  • Terra SDVoE 10G input card

Refresh rates

  • Up to 60Hz

Video format

  • Up to 2048 x 1080
  • 4:4:4
  • 12 BPC
Control & networking
  • Ethernet (10/100) RJ45
  • RS232 in
  • Wired Keypad (XLR)
  • Built-in Backlit Keypad with Color Display
  • GPIO (D-SUB 9-pin male connector)
Lens options
  • 0.37:1 UST
  • 0.67:1
  • 1.1:1
  • 0.8-1.16:1
  • 1.16-1.49:1
  • 1.4-1.8:1
  • 1.8-2.6:1
  • 2.6-4.1:1
  • 4.1-6.9:1
  • 6.9-10.4:1
Operating environment
  • Temp: 40 to 104°F (5 to 40°C)
  • Humidity: 10-80% non-condensing
Power requirements

Main power

  • Electrical Rating: 200-240 VAC, 16A max., 50/60 Hz
  • Inlet Type: IEC320-C20
  • 3200 W Power Consumption
  • 10,929 BTU/Hr dissipation

Limited mode

  • Electrical Rating: 100-240Vac, 15-6A, 50/60Hz
  • Inlet type: IEC320-C14
Physical dimensions (L x W x H)
  • 37.7 x 25.0 x 11.9"
  • 957 x 635 x 302mm
Physical weight
  • 172.5 lbs (78.2kg)

Christie maintenance services

1. Protect your investment in Christie products

From preventative projector maintenance to light engine cleaning, Christie maintenance services help optimize the safety, efficiency, brightness and lifetime of your Christie projector. We have the expertise, the tools and a state-of-the-art ISO 6 – Class 1000 cleanroom. We’re here for you!

Did you know? Failing to perform maintenance services can actually void your products’ warranty. And all maintenance services must be performed by Christie accredited service technicians. Please refer to the user manual of your Christie projector for detailed guidelines.

2. Preventative projector maintenance – available for all projectors

We offer 3 levels of preventative maintenance for Christie projectors:

  • Level 1 – Includes a 60-point inspection, cleaning, new air filter, and any needed software upgrades. We also confirm convergence, verify color quality, test all inputs, check audio/video and computer imaging, test focus and zoom, and more.
  • Level 2 – Includes Level 1, plus we remove all covers and any dust from within the projector, clean the light engine, and lamp reflector if applicable.
  • Level 3 – Includes Levels 1 and 2, plus a full optical alignment and correction, including lamp adjustments, boresight, fold mirror and integrator alignments.

3. Bring back brightness with 3DLP projector light engine cleaning

When dust and debris accumulates, your projector loses lumens. A clean light engine can bring back brightness! When you send us your 3DLP® light engine for cleaning, we disassemble, clean and reassemble it, then realign it to maximize light output. It’s only possible at Christie: Using proprietary technology and software, we also align your 3DLP chips and colors for maximum optical output. Your cleaned light engine leaves with a 1-year warranty.

4. Did you know? Even sealed projector light engines benefit from regular cleaning

Sealed light engines reduce the impact of dust and debris on projector optics, which in turn helps extend life. Send us your light engine for sealing. We disassemble, clean and re-assemble it, re-align to maximize light output and then seal it for added protection. Your sealed light engine leaves with a 1-year warranty.

Note: Not all projector light engines can be sealed. Contact Christie Technical Support to find out if yours can.

5. Our promise

During any Christie maintenance service, if we determine that any additional work or parts are required, we’ll contact you, provide a quote and estimated turnaround time, and only proceed with your approval.

Need Christie maintenance services for your equipment?

Contact Christie Technical Support today!

By phone - Call toll-free (800) 221-8025 and select option #3
By email at support.americas@christiedigital.com

Hours of operation (in the Americas)
Monday – Friday
5:00 a.m. – 5:00 p.m. Pacific Time
8:00 a.m. – 8:00 p.m. Eastern Time