Manage arrayed projectors to display virtually any image anywhere. Warping and blending with Christie twist

Want to compare Christie laser against the competition?

Click here to Watch the Christie BoldColor video

16 x HS Series at Glow 2019. View the results of ProAV teamwork at its finest

Christie D16WU-HS

Enjoy the freedom of unrestricted power. Hitting 17,000 lumens, the Christie® D16WU-HS is the lightest and brightest 1DLP® laser projector to operate at full-brightness on a single 15A, 110V circuit. There’s no need for high-power runs. Simply plug into a standard outlet and start the show!

Key features include

Christie BoldColor Technology - Enhanced colour performance and saturation over standard laser projection
Warp and blend – Built-in Christie Twist for quick and easy setup of multi-projector displays
Compatible with Christie Mystique – Automated camera-based alignment solution for aligning and stacking complex multi-projector arrays
Lens compatibility – Designed to work with all Christie HS Series lenses for added cost savings and versatility
Christie Virtual Remote 1DLP – Gives you wireless control from any smartphone or tablet
Advanced electronics – Firmware updates take only minutes
Capable of 120Hz @ 1080P for high frame rate (HFR) blur free content.

Tick In stock

Where to buy
this projector

Select

Specification
Downloads
Accessories & Lenses
Comparison chart
Videos & case studies
Warranty & Service

Image	Brightness 17,400 ISO lumens 15,500 ANSI lumens Color wheel 4 segment (RGBY) - 2X or 3X speed Contrast (nominal) Full on/off (Christie RealBlack enabled): 2,000,000:1 Dynamic contrast: 5000:1 Full on/off (Christie RealBlack disabled): 1200:1 ANSI 250:1
Display	Type 1 x 0.96” DMD Native resolution 1920 x 1200 (2,304,000 pixels) 16:10
Illumination system	Type Laser phosphor with Christie BoldColor Technology Illumination performance 20,000 hours to 50% brightness
Signal inputs	Standard HDMI x 2 (one on rear panel, one on bottom of projector, independently selectable) 3GSDI x 1 (BNC) DVI-D x 1 (digital only) HD15 x 1 USB x 1 (type A) - image viewer or WiFi dongle (optional) HDBaseT (RJ45 x 1) 3D HDMI 1.4, HDBaseT - frame packed, top/bottom, side-by-side Up to 120Hz output 3D Sync In (BNC) - for genlocking projectors 3D Sync Out (BNC) - for genlocking projectors or controlling emitters Signals HDTV formats VGA through to WUXGA (1920 x 1200) Horizontal and vertical scaling while maintaining aspect ratio, all inputs Pixel clock 162 MHz Scan rates Horizontal: 15 kHz to 91 kHz Vertical: 24 Hz to 85 Hz
Signal outputs	Monitor out (loop through) 3GSDI x 1 (BNC) HDMI x 1 (HDMI out)
Control and networking	RS232 In Control via HDBaseT Ethernet (10/100) RJ45 Built-in backlit keypad Wired remote control (3.5mm stereo) - loop out available for daisy chaining 12VDC trigger at 200mA (ID:2.5mm)
Accessories	Standard IR remote w/ wired remote jack (wire not included) AC line cords for projector head User manual Optional Christie One Rigging Frame Lens adapter for E Series lenses 1DWUSB-BGN (wireless dongle for video and control) HS fog filter covers + filters (order once per projector then only filters refills) HS fog filter refills (1 set) Christie One Mount Plus One Mount Extender Rod One Mount Rigging Kit (used with One Mount, One Mount Plus and/or One Mount Extender Rod) Replacement remote control
Warping and blending	Standard: Christie Twist^™ Optional: Christie Twist Premium and Twist Pro Christie Mystique^™ automated camera-based alignment
Lens mount	Boresight adjustable Motorized horizontal and vertical lens offset (memory available) Motorized zoom and focus adjustment (memory available for full ILS lenses)
Lens options	Lenses 0.84-1.02:1 zoom lens (no zoom/focus memory) - adapted 1.2-1.5:1 E Series lens 1.02-1.36:1 zoom lens (no zoom/focus memory) - adapted 1.5-2.0:1 E Series lens 1.2-1.5:1 zoom lens (full ILS) 1.5-2.0:1 zoom lens (full ILS) 2.0-4.0:1 zoom lens (full ILS) 4.0-7.0:1 zoom lens (full ILS)
Power requirements	Operating voltage Normal: 100-240VAC @ 60/50 Hz Power consumption Normal mode: 1250W +/-15% (220V), 1300W +/-15% (110V) ECO1 mode: 1020W +/-15% (220V), 1050W +/-15%(110V) ECO2 mode: 700W +/-15% (220V), 700W +/-15%(110V) Operating current Normal mode: 6.0A ±15% (220 VAC), 11.9A ±15% (110 VAC) ECO1 mode: 4.7A ±15% (220 VAC), 9.6A ±15% (110 VAC) ECO2 mode: 6.5A ±15% (220 VAC), 3.2A ±15% (110 VAC) Dissipation Normal mode: 4450 BTU/hr ECO1 mode: 3600 BTU/hr ECO2 mode: 2450 BTU/hr
Audible noise	Typical: 45dB(A) Eco mode: 39dB(A)
Physical specs	Dimensions (L x W x H) 26.65 x 23.46 x 7.99" (677 x 596 x 203mm) without feet Weight (without lens) 93.7 lb (42.5 kg) Shipping dimensions (L x W x H) 36.34 x 33.19 x 20.20" (923 x 843 x 513mm) Shipping weight 119 lb (54 kg)
Operating environment	Temp: 0 to 40° C (32 to 104° F) Humidity: 0 - 85% non-condensing
Regulatory	Contact Christie for the timing of certifications: UL/CSA/IEC 60950-1 FCC Class A CE FDA CCC KC PSE CU SABS BIS VCCI RCM Ukr TER SASO This product conforms to all relevant European directives, standards, safety, health and environmental concerns RoHS REACH WEEE
Limited warranty	Three years parts and labor on the projector Three years or 20,000 hours parts and labor on the illumination system* Contact an authorized Christie representative for full details of our limited warranty

Accessories	Christie One Rigging Frame
Ceiling Mounts	Christie One Mount Plus
Lens Adapters	Lens adapter for Christie E Series 1.5-2.0:1 zoom lens

Which HS Series is right for you?

	D13HD-HS / D13WU-HS	D16HD-HS / D16WU-HS	D20HD-HS / D20WU-HS	4K7-HS / 4K10-HS
BoldColor
Omnidirectional
Christie Twist
Long-life laser light source
Christie Virtual Remote
Weighs < 80lbs/36kg
Lens compatibility
Advanced electronics
15A/120V operation
4K UHD resolution
12G SDI input
HDR10 compatible
4K60Hz compatibility
OPS slot
SDVoE (Terra)

*4 out of 6 lenses are compatible – see spec sheet for details.

Welcome home. Alpha Foxtrot.

Nothing came close to Concorde Alpha Foxtrot. Now on permanent static display illuminated by Christie’s HS Series high-performance

Read the case study

Christie 4K7-HS. Chosen by the greatest minds in neuroscience.

An exhibition that journeys into the brain’s origin, revealing the complexity of the human mind, and the challenges of artificial minds.

Read the case study

The importance of silent operation

When quiet operation is essential, choose the Christie HS Series. At just 39 dBA, the HS Series was Barcelona Symphony Orchestra’s first choice for Verdi’s Requiem.

Watch the video

A legend comes alive with Christie HS Series 1DLP laser

An audience of 800,000. Twelve, 20,000 lumen, D20WU-HS. Every legendary brick of Catharinakerk's 72 metre fascia became a stage for virtual dancers at Glow 2018, Eindhoven.

Watch the video

16x HS Series at GLOW 2019. View the results of ProAV teamwork at it's finest for an audience of over 800,000.

Watch the video

Christie maintenance services

1. Protect your investment in Christie products

From preventative projector maintenance to light engine cleaning, Christie maintenance services help optimize the safety, efficiency, brightness and lifetime of your Christie projector. We have the expertise, the tools and a state-of-the-art ISO 6 – Class 1000 cleanroom. We’re here for you!

Did you know? Failing to perform maintenance services can actually void your products’ warranty. And all maintenance services must be performed by Christie accredited service technicians. Please refer to the user manual of your Christie projector for detailed guidelines.

2. Preventative projector maintenance – available for all projectors

We offer 3 levels of preventative maintenance for Christie projectors:

Level 1 – Includes a 60-point inspection, cleaning, new air filter, and any needed software upgrades. We also confirm convergence, verify color quality, test all inputs, check audio/video and computer imaging, test focus and zoom, and more.
Level 2 – Includes Level 1, plus we remove all covers and any dust from within the projector, clean the light engine, and lamp reflector if applicable.
Level 3 – Includes Levels 1 and 2, plus a full optical alignment and correction, including lamp adjustments, boresight, fold mirror and integrator alignments.

3. Bring back brightness with 3DLP projector light engine cleaning

When dust and debris accumulates, your projector loses lumens. A clean light engine can bring back brightness! When you send us your 3DLP® light engine for cleaning, we disassemble, clean and reassemble it, then realign it to maximize light output. It’s only possible at Christie: Using proprietary technology and software, we also align your 3DLP chips and colors for maximum optical output. Your cleaned light engine leaves with a 1-year warranty.

4. Did you know? Even sealed projector light engines benefit from regular cleaning

Sealed light engines reduce the impact of dust and debris on projector optics, which in turn helps extend life. Send us your light engine for sealing. We disassemble, clean and re-assemble it, re-align to maximize light output and then seal it for added protection. Your sealed light engine leaves with a 1-year warranty.

Note: Not all projector light engines can be sealed. Contact Christie Technical Support to find out if yours can.

5. Our promise

During any Christie maintenance service, if we determine that any additional work or parts are required, we’ll contact you, provide a quote and estimated turnaround time, and only proceed with your approval.

Need Christie maintenance services for your equipment?

Contact Christie Technical Support today!

By phone - Call toll-free (800) 221-8025 and select option #3
By email at support.americas@christiedigital.com

Hours of operation (in the Americas)
Monday – Friday
5:00 a.m. – 5:00 p.m. Pacific Time
8:00 a.m. – 8:00 p.m. Eastern Time

By phone - Call +44 (0) 118 977 8111
By email at Support.emea@christiedigital.com

Hours of operation (in EMEA) Monday – Friday
5:00 a.m. – 5:00 p.m. Pacific Time
8:00 a.m. – 8:00 p.m. Eastern Time