Christie use cookies to enhance you user experience while visiting our website, to provide social media features, to serve targeted advertising and to analyse traffic. By clicking 'Accept', closing this message or continuing to use this site, we consider that you agree to our use of cookies in accordance with our Cookie Notice

Christi​e D16HD-HS

Enjoy the freedom of unrestricted power. Hitting 17,000 lumens, the Christie® D16WU-HS is the lightest and brightest 1DLP® laser projector to operate at full-brightness on a single 15A, 110V circuit. There’s no need for high-power runs. Simply plug into a standard outlet and start the show!

Key features include

  • Christie BoldColor Technology​ - Enhanced colour performance and saturation over standard laser projection
  • Warp and blend – Built-in Christie Twist​ for quick and easy setup of multi-projector displays
  • Compatible with Christie Mystique – Automated camera-based alignment solution for aligning and stacking complex multi-projector arrays
  • Lens compatibility – Designed to work with all Christie HS Series lenses for added cost savings and versatility
  • Christie Virtual Remote 1DLP – Gives you wireless control from any smartphone or tablet
  • Advanced electronics – Firmware updates take only minutes

Tick   In stock

  • Specification
  • Downloads
  • Accessories & Lenses
  • Comparison chart
  • Videos & case studies
  • Warranty & Service
Image

Brightness

  • 15,750 ISO lumens
  • 14,000 ANSI lumens

Color wheel

  • 4 segment (RGBY) - 2X or 3X speed

Contrast (nominal)

  • Full on/off (Christie RealBlack enabled): 2,000,000:1
  • Dynamic contrast: 5000:1
  • Full on/off (Christie RealBlack disabled): 1200:1
  • ANSI 250:1
Display

Type

  • 1 x 0.96” DMD

Native resolution

  • 1920 x 1080 (2,073,600 pixels) 16:9
Illumination system

Type

illumination performance

  • 20,000 hours to 50%
Signal inputs

Standard

  • HDMI x 2 (one on rear panel, one on bottom of projector, independently selectable)
  • 3GSDI x 1 (BNC)
  • DVI-D x 1 (digital only)
  • HD15 x 1
  • USB x 1 (type A) - image viewer or WiFi dongle (optional)
  • HDBaseT (RJ45 x 1)

3D

  • HDMI 1.4, HDBaseT - frame packed, top/bottom, side-by-side
  • Up to 120Hz output
  • 3D Sync In (BNC) - for genlocking projectors
  • 3D Sync Out (BNC) - for genlocking projectors or controlling emitters

Signals

  • HDTV formats VGA through to WUXGA (1920 x 1200)
  • Horizontal and vertical scaling while maintaining aspect ratio, all inputs

Pixel clock

  • 162 MHz

Scan rates

  • Horizontal: 15 kHz to 91 kHz
  • Vertical: 24 Hz to 85 Hz
Signal outputs

Monitor out (loop through)

  • 3GSDI x 1 (BNC)
  • HDMI x 1 (HDMI out)
Control and networking
  • RS232 In
  • Control via HDBaseT
  • Ethernet (10/100) RJ45
  • Built-in backlit keypad
  • Wired remote control (3.5mm stereo) - loop out available for daisy chaining
  • 12VDC trigger at 200mA (ID:2.5mm)
Accessories

Standard

  • IR remote w/ wired remote jack (wire not included)
  • AC line cords for projector head
  • User manual

Optional

  • Christie One Rigging Frame
  • Lens adapter for E Series lenses
  • 1DWUSB-BGN (wireless dongle for video and control)
  • HS fog filter covers + filters (order once per projector then only filters refills)
  • HS fog filter refills (1 set)
  • Christie One Mount Plus
  • One Mount Extender Rod
  • One Mount Rigging Kit (used with One Mount, One Mount Plus and/or One Mount Extender Rod)
  • Replacement remote control
Warpin​g and blending

Standard:

  • Christie Twist

Optional:

  • Christie Twist Premium and Twist Pro
  • Christie Mystique automated camera-based alignment
​Lens mount
  • Boresight adjustable
  • Motorized horizontal and vertical lens offset (memory available)
  • Motorized zoom and focus adjustment (memory available for full ILS lenses)
Lens options

Lenses

  • 0.84-1.02:1 zoom lens (no zoom/focus memory) - adapted 1.2-1.5:1 E Series lens
  • 1.02-1.36:1 zoom lens (no zoom/focus memory) - adapted 1.5-2.0:1 E Series lens
  • 1.2-1.5:1 zoom lens (full ILS)
  • 1.5-2.0:1 zoom lens (full ILS)
  • 2.0-4.0:1 zoom lens (full ILS)
  • 4.0-7.0:1 zoom lens (full ILS)
Power requirements

Operating voltage

  • Normal: 100-240VAC @ 60/50 Hz

Power consumption

  • Normal mode: 1250W +/-15% (220V), 1300W +/-15% (110V)
  • ECO1 mode: 1020W +/-15% (220V), 1050W +/-15%(110V)
  • ECO2 mode: 700W +/-15% (220V), 700W +/-15%(110V)

Operating current

  • Normal mode: 6.0A ±15% (220 VAC), 11.9A ±15% (110 VAC)
  • ECO1 mode: 4.7A ±15% (220 VAC), 9.6A ±15% (110 VAC)
  • ECO2 mode: 6.5A ±15% (220 VAC), 3.2A ±15% (110 VAC)

Dissipation

  • Normal mode: 4450 BTU/hr
  • ECO1 mode: 3600 BTU/hr
  • ECO2 mode: 2450 BTU/hr
Audible noise
  • Typical: 45dB(A)
  • Eco mode: 39dB(A)
Physical specs

Dimensions

  • (L x W x H) 26.65 x 23.46 x 7.99" (677 x 596 x 203mm) without feet

Weight (without lens)

  • 93.7 lb (42.5 kg)

Shipping dimensions

  • (L x W x H) 36.34 x 33.19 x 20.20" (923 x 843 x 513mm)

Shipping weight

  • 119 lb (54 kg)
Operating environment
  • Temp: 0 to 40° C (32 to 104° F)
  • Humidity: 0 - 85% non-condensing
<p> Contact Christie for the timing of certifications:

  • UL/CSA/IEC 60950-1
  • FCC Class A
  • CE
  • FDA
  • CCC
  • KC
  • PSE
  • CU
  • SABS
  • BIS
  • VCCI
  • RCM
  • Ukr
  • TER
  • SASO

This product conforms to all relevant European directives, standards, safety, health and environmental concerns

  • RoHS
  • REACH
  • WEEE
Limited warranty
  • Three years parts and labor on the projector
  • Three years or 15,000 hours parts and labor on the illumination system*
  • Contact an authorized Christie representative for full details of our limited warranty

Which HS Series is right for you?

  D13HD-HS / D13WU-HS D16HD-HS /  D16WU-HS D20HD-HS /  D20WU-HS 4K7-HS / 4K10-HS
BoldColor Tick Tick Tick Tick
Omnidirectional Tick Tick Tick Tick
Christie Twist Tick Tick Tick
Long-life laser light source Tick Tick Tick Tick
Christie Virtual Remote Tick Tick Tick Tick
Weighs < 80lbs/36kg Tick
Lens compatibility Tick Tick Tick Tick
Advanced electronics Tick Tick Tick
15A/120V operation Tick Tick Tick
4K UHD resolution Tick
12G SDI input Tick
HDR10 compatible Tick Tick Tick
4K60Hz compatibility Tick
OPS slot Tick
SDVoE (Terra) Tick

*4 out of 6 lenses are compatible – see spec sheet for details.

Christie maintenance services

1. Protect your investment in Christie products

From preventative projector maintenance to light engine cleaning, Christie maintenance services help optimize the safety, efficiency, brightness and lifetime of your Christie projector. We have the expertise, the tools and a state-of-the-art ISO 6 – Class 1000 cleanroom. We’re here for you!

Did you know? Failing to perform maintenance services can actually void your products’ warranty. And all maintenance services must be performed by Christie accredited service technicians. Please refer to the user manual of your Christie projector for detailed guidelines.

2. Preventative projector maintenance – available for all projectors

We offer 3 levels of preventative maintenance for Christie projectors:

  • Level 1 – Includes a 60-point inspection, cleaning, new air filter, and any needed software upgrades. We also confirm convergence, verify color quality, test all inputs, check audio/video and computer imaging, test focus and zoom, and more.
  • Level 2 – Includes Level 1, plus we remove all covers and any dust from within the projector, clean the light engine, and lamp reflector if applicable.
  • Level 3 – Includes Levels 1 and 2, plus a full optical alignment and correction, including lamp adjustments, boresight, fold mirror and integrator alignments.

3. Bring back brightness with 3DLP projector light engine cleaning

When dust and debris accumulates, your projector loses lumens. A clean light engine can bring back brightness! When you send us your 3DLP® light engine for cleaning, we disassemble, clean and reassemble it, then realign it to maximize light output. It’s only possible at Christie: Using proprietary technology and software, we also align your 3DLP chips and colors for maximum optical output. Your cleaned light engine leaves with a 1-year warranty.

4. Did you know? Even sealed projector light engines benefit from regular cleaning

Sealed light engines reduce the impact of dust and debris on projector optics, which in turn helps extend life. Send us your light engine for sealing. We disassemble, clean and re-assemble it, re-align to maximize light output and then seal it for added protection. Your sealed light engine leaves with a 1-year warranty.

Note: Not all projector light engines can be sealed. Contact Christie Technical Support to find out if yours can.

5. Our promise

During any Christie maintenance service, if we determine that any additional work or parts are required, we’ll contact you, provide a quote and estimated turnaround time, and only proceed with your approval.

Need Christie maintenance services for your equipment?

Contact Christie Technical Support today!

By phone - Call toll-free (800) 221-8025 and select option #3
By email at support.americas@christiedigital.com

Hours of operation (in the Americas)
Monday – Friday
5:00 a.m. – 5:00 p.m. Pacific Time
8:00 a.m. – 8:00 p.m. Eastern Time